Mil-spec part number, AS3582 family
AS3582-121 O-ring: silicone (VMQ), the AS568-121 size
AS3582-121 is the AS568-121 O-ring size, 1.049 in (26.64 mm) inside diameter by 0.103 in (2.62 mm) cross-section, in silicone (VMQ) procured to SAE AS3582 (AMS3304). The SAE Mobilus record reads: AS3582 current (reaffirmed 2018). The dash sets the size and the document sets the compound, so an AS568-121 in another compound is not the same part as AS3582-121. Send the designator exactly as the print reads and we quote it against that document.
- Inside diameter
- 1.049 in26.64 mm, +/- 0.010 in
- Cross-section
- 0.103 in2.62 mm, +/- 0.003 in
- AS568 size
- AS568-1211xx series
- Document status
- AS3582 current (reaffirmed 2018)SAE-AS3582
Part facts
| Item | Value |
|---|---|
| Part number | AS3582-121 |
| NSN | 5331-00-437-5261 (DLA FLIS, read 2026-10-08) |
| Stock | In stock in Orange, CA |
| Procured to | SAE AS3582 (AMS3304) |
| SAE document | none beyond the document above |
| Status | AS3582 current (reaffirmed 2018) |
| Base polymer | Silicone (VMQ) |
| AS568 size | AS568-121 |
| CAD for the AS568-121 size | AS568-121 STEP 3D solid, AS568-121 DXF 2D drawing, AS568-121 PDF dimensioned drawing; generated from the AS568 nominal dimensions, so verify against your drawing |
| Back-up rings | MS28774-121 (single-turn scarf-cut PTFE) or MS27595-121 (continuous PTFE), both procured to SAE AS8791; both drawings are inactive for new design |
| Dimension | Value | Tolerance |
|---|---|---|
| Inside diameter (ID) | 1.049 in 26.64 mm | +/- 0.010 in (0.25 mm) |
| Cross-section (W) | 0.103 in 2.62 mm | +/- 0.003 in (0.08 mm) |
| Outside diameter (reference) | 1.255 in 31.88 mm | derived: ID + 2 x W |
Millimeter values are converted from the inch table. One manufacturer's aerospace cross-reference (Freudenberg, July 2024, read 2026-09-27) lists MS9068 against AMS3304 and holds its parts over 0.500 in ID to a tight tolerance; MS9068's document status is not verified here.
Same nominal size, other documents
Other part numbers for the AS568-121 size
These part numbers name the AS568-121 nominal size under a different document, so each one is a different compound. They are not interchangeable with AS3582-121 unless the print or the buyer's engineering allows it. At this size the family sheets for MS28775-121, MS29513-121 and AS9386-121 hold a tighter inside-diameter tolerance than AS568.
| Part number | Document | Polymer | Status |
|---|---|---|---|
| MS28775-121 | MIL-PRF-25732 (MS28775 part drawing) | NBR | Inactive (MIL-PRF-25732); AS28775A current |
| M83461/1-121 | MIL-P-83461/1 | NBR | Canceled; AS83461/1C current |
| M83248/1-121 | MIL-R-83248/1 (Class 1) | FKM | Canceled; AS3209C stabilized; AS83248/1A current |
| M83248/2-121 | MIL-R-83248/2 (Class 2) | FKM | Canceled; AS3581A stabilized; AS83248/2A current |
| AS3209-121 | SAE AS3209 (AMS7276) | FKM | AS3209C stabilized |
| M83485/1-121 | MIL-R-83485 | FKM, low-temperature grade | Canceled |
| M25988/1-121 | MIL-DTL-25988/1 | FVMQ | Active |
| M25988/2-121 | MIL-DTL-25988/2 | FVMQ | Active |
| M25988/3-121 | MIL-DTL-25988/3 | FVMQ | Active |
| M25988/4-121 | MIL-DTL-25988/4 | FVMQ | Active |
| MS29513-121 | MIL-P-5315 (MS29513 part drawing) | NBR | Canceled (MIL-P-5315); AS29513C current |
| AS9386-121 | SAE AS9386 (AMS7267) | VMQ silicone | AS9386B current |
The base polymer
AS3582-121 is silicone (VMQ). The Parker® O-Ring Handbook ORD 5700 range published for the VMQ family (section 2.2) is -54 C to 204 C. That is the polymer family's range, not this document's requirement; the compound sheet for the qualified grade governs.
Material page: Silicone (VMQ) O-rings. Every document in the family: AS3582 O-rings.
Nearby AS3582 part numbers
| Part number | ID in | ID mm | W in | W mm |
|---|---|---|---|---|
| AS3582-113 | 0.549 | 13.94 | 0.103 | 2.62 |
| AS3582-115 | 0.674 | 17.12 | 0.103 | 2.62 |
| AS3582-119 | 0.924 | 23.47 | 0.103 | 2.62 |
| AS3582-121 | 1.049 | 26.64 | 0.103 | 2.62 |
| AS3582-126 | 1.362 | 34.59 | 0.103 | 2.62 |
| AS3582-128 | 1.487 | 37.77 | 0.103 | 2.62 |
| AS3582-129 | 1.549 | 39.34 | 0.103 | 2.62 |
Frequently asked
What is the AS568 equivalent of AS3582-121?
AS3582-121 is the AS568-121 size: 1.049 in (26.64 mm) inside diameter by 0.103 in (2.62 mm) cross-section. The dash sets the size; SAE AS3582 (AMS3304) sets the silicone (VMQ) compound. An AS568-121 ring in any other compound has the same dimensions but is not the same part as AS3582-121.
What is the NSN for AS3582-121?
DLA's public FLIS data lists AS3582-121 on NSN 5331-00-437-5261 (read 2026-10-08). An NSN is the federal catalog's number for the item; your contract or print decides what is ordered.
Is SAE-AS3582 still active?
The document status reads: AS3582 current (reaffirmed 2018). It comes from the SAE Mobilus record listed under Sources, with the date it was read.
How do I order AS3582-121?
Send the designator exactly as the print reads, with its revision, any suffix letter, the quantity and the paperwork the order needs. AS3582-121 is quoted and supplied against SAE AS3582 (AMS3304), in the compound the print calls out, with a certificate of conformance with every order. When the print calls out a QPL-listed specification, the finished molded O-ring, or the material it is molded from, comes from a manufacturer listed on that QPL; Conquest supplies it and is not itself on any QPL. A Conquest representative replies within one business day.
Sources
SAE Mobilus: AS3582 (issued September 1996, reaffirmed 2018-08-23) and AMS3304J (revised 2019-04-05), read 2026-09-27; the NSNs from DLA's public FLIS data (PUB LOG Reference, Identification and Characteristics files, updated 2026-10-01, read 2026-10-08); an NSN is the federal catalog's stock number for an item and does not name or approve a supplier; AS568 dimensions from the Parker O-Ring Handbook ORD 5700, 2021 printing, section IX, AS568 size tables (Series 2-XXX and 3-XXX), pages 9-2 to 9-11, read 2026-10-13; the dash-to-size mapping from the Freudenberg Sealing Technologies, Aerospace Part and Material Cross-Reference brochure (July 2024), pages 3 and 4, read 2026-10-13; the other part numbers' dash-to-size mapping and tolerance note from the MS28775 Revision E sheet (1984-03-23, read 2026-10-04), MS29513 Revision C sheet (1966-09-16, read 2026-09-27) and MS9386 Revision B sheet (1975-01-17, read 2026-09-27), DLA ASSIST; the other part numbers' statuses from DLA ASSIST document details, idents 18115 (MIL-PRF-25732), 33814 (MIL-P-83461/1), 33574 (MIL-R-83248/1), 33575 (MIL-R-83248/2), 33840 (MIL-R-83485/1), 18214 (MIL-DTL-25988/1), 18215 (MIL-DTL-25988/2), 18216 (MIL-DTL-25988/3), 18217 (MIL-DTL-25988/4) and 5334 (MIL-P-5315), read 2026-09-24; SAE Mobilus current-revision records AS83248/2A, read 2026-09-28; AS83461/1C, AS3209C, AS83248/1A, AS3581A, AS29513C and AS9386B, read 2026-09-27; AS28775A, read 2026-09-25; the MIL-R-83248/1A cancellation notice (Notice 5, 2008-07-24), DLA ASSIST, read 2026-09-29; the SAE-AS83248/2 adoption record, DLA ASSIST ident 286631, read 2026-09-28; the polymers from the Parker O-Ring Handbook ORD 5700A/US, section 8, pages 8-2, 8-4 and 8-5 (read 2026-09-24); the back-up ring pairing and cut styles from the same handbook, section 6, pages 6-8 and 6-9 (read 2026-09-25); SAE AS8791 and the drawings' status from the MS28774M and MS27595E drawings, DLA ASSIST (read 2026-09-28); Parker O-Ring Handbook ORD 5700A/US, section 2.2, for the polymer family range (read 2026-09-14). Facts are stated in our own words and arrangement; no standard's text or table is reproduced.
Parker is a trademark of Parker Hannifin Corporation; no affiliation or endorsement is implied.
Freudenberg is a trademark of its owner; no affiliation or endorsement is implied.
Setting Conquest Seal up as a supplier?
Orders are handled under Conquest Seal's AS9100D quality management system, whose certificate scope includes distribution.
Need AS3582-121 with certification?
Send the part number as the print reads it, the quantity and the paperwork the order needs. A Conquest representative replies within one business day. A person answers (714) 632-9830, Pacific business hours.
Request a quoteLast updated